09-04-2002 11:50 PM - edited 03-02-2019 01:08 AM
Hi,
Is it possible to have simultanious dial in and dial out connection on the same ISDN BRI? I suppose there are some limitations with the signaling but would like to verify with the forum
Thks
Velimir
09-05-2002 08:15 AM
BRI line has 2 B-channels and a D channel..so you can use one for dialin and another for dialout simultaneously...D channel is the one which will handle signalling part..
09-09-2002 10:30 PM
Thanks for your resopnse.
I searched all over Cisco's site and could not find any sample config on this problem. Do you have any suggestions?
Regards
Velimir
09-13-2002 02:11 AM
Hi Velimir
You can use dialer profile to configure this. You create two profiles one for dial out and one for dila-in.You may find many configurations of dialer profile on cisco website.
You can find more details on this link. This logical profile will carry out your in and out functionality.
http://www.cisco.com/warp/public/793/access_dial/ddr_dialer_profile.html
Dilip
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide