ISDN Problem

[oratecorp]

hi ,

I am facing a ISDN configuration problem... My senario is as follow..

1 ) I have one 2mb & one 64kbps links to one of my regional office.......

2) My office should dial ISDN in such a way that only if both 2mb & 64kbps links r down then only ISDN should fire.

3) Can anyone help me with a sample configuration....

My sreial links r

serial0/0 ----- 2mb is connected

serial1/0 ----- 64kbps is connected

Bri int is bri0/0

4) we r using EIGRP protocol

Any help in this would be appreciated

Regds,

Oratecorp

[msdesai]

Hi

You can use dialer watch instead of legacy DDR for dial backup. By using Dialer Watch you are monitoring the routes to regional office instead link status of 2MB & 64kbps connection....

Please refer to below link for more information on configuring Dial backup using Dialer Watch:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/fnsprt6/dcdbakdw.htm

Let me know if you have any questions...

MD