07-06-2004 01:55 PM - edited 03-02-2019 04:52 PM
Hi to all,
I have a 1751 and i want connect it to internet using a 56k faxmodem of us robotics, i have configured the router with the following config:
ip subnet-zero
no ip domain-lookup
ip routing
modemcap entry usr_sportster:FD=&F:AA=S0=1:CD=&C1:DTR=&D2:HFL=&H3&R2:SPD=&B0:BCP=&K0:NER=&M0:NEC=E0:NRS=Q1
!
interface Dialer 1
description connected to Internet
ip address negotiated
encapsulation ppp
dialer in-band
dialer idle-timeout 120
dialer string ispnumber
dialer hold-queue 10
dialer-group 1
pulse-time 3
ppp authentication chap pap callin
ppp chap hostname username
ppp chap password password
ppp pap sent-username username password password
no cdp enable
!
interface FastEthernet 0/0
no shutdown
description connected to 192.168.0.0
ip address 192.168.0.1 255.255.255.0
keepalive 10
!
interface Async 5
no shutdown
description connected to Internet
no ip address
async mode dedicated
dialer rotary-group 1
!
interface Ethernet 0/0
no shutdown
description connected to 172.16.0.0
ip address 172.16.0.1 255.255.255.0
keepalive 10
!
! Dialer Control List 1
!
dialer-list 1 protocol ip permit
access-list 1
ip classless
!
! IP Static Routes
ip route 0.0.0.0 0.0.0.0 Dialer 1
no ip http server
!
line console 0
exec-timeout 0 0
password 31081974
login
!
line vty 0 4
password 31081974
login
!
line aux 0
autoselect ppp
modem InOut
modem autoconfigure type usr_sportster
transport input all
stopbits 1
speed 56000
flowcontrol hardware
!
end
The router establish connection when from the pc i open the browser but i don't see any packet routed by the router and on the console terminal appear this message:
00:08:35: %PPP-3-AUXFAST: Fast-switching to aux port, packet dropped.
Where is the problem? And how i can disable the modem speaker? i have found the at command but how i can apply this in the init string of the modem?
Thanks and Best Regards.
Carlo S.
07-06-2004 02:20 PM
Fastswitching is not supported on slower interfaces like aux ports. Hence disabling fast switching using the command 'no ip route-cache' in the dialer
interface/ async 5 should solve this problem.
Thanks, Mak
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide