08-04-2003 03:16 AM - edited 03-02-2019 09:19 AM
I´ve got problems to manage AP350 with cw2000. New package is installed. I can only configure the read community in the AP350, but for communication cw2k needs the write community. What´s tehe problem ??
I look forward to your reply,
thank you very much
Adi
08-04-2003 09:47 AM
If this AP350 is running VxWorks, then the User that you created is the SNMP string. Depending upon the what specific capability settings you have enabled for this user will make it a RO, RW or both.
If the APs are running 11.x code, read-only needs "snmp + admin + firmware" rights.
- If the APs are running 12.x code, read-only needs "snmp + admin" rights.
08-05-2003 12:41 AM
Hi
Thank you very much.
I have only another problem. to save the running- and startup- files from the AP´s, wich settings i need ?? the device status say´s "telnet is not supported".
Thank´s in advance
Adi
08-05-2003 10:23 AM
APs running VxWorks have no concept of a start-up and a running config. It's just like CatOS where everything is running config.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide