Memory 2611XM

[admin_2]

People,

Do you know if I can put a 32MB (125Mhz) and 32MB (100 Mhz) to work properly on a Cisco 2611XM ?

Regards,

[Georg Pauwen · Accepted solution]

Hello,

not sure about the 100/125Mhz, but if the memory comes from a 2600 Series (not XM) router it won't work. The XM memory and the non-XM memory are not compatible.

HTH,

GP

[sales]

correct different modules & speeds.  And to reach higher memory capacity you will need a DBOT MEM2600XM-128DBOTor MEM2600XM-256DBOT

http://simondirect.com/store/index.php?main_page=index&cPath=7_23

MAIN CISCO DRAM MEMORY
Maximum Memory: 256mb
Base Memory: 32mb/64mb (Removable)
Upgrade Sockets: 2 (2 banks of 1)

CISCO FLASH MEMORY
Maximum Memory: 48mb
Base Memory: 16mb (Non removable)
Upgrade Sockets: 1 (1 bank of 1)