cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1185
Views
0
Helpful
1
Replies

missing "mkdir" command in IOS 12.1E

triplecap
Level 1
Level 1

The command reference shows there's supposed to be a "mkdir" command to create folders within the filesystem - however, this command doesn't exist. I'm running image c6sup11-pk2sv-mz.121-26.E1.bin on a Catalyst 6500 in priveleged mode (15). Any suggestions on this one?

Thanks in advance,

Eric

1 Reply 1

Prashanth Krishnappa
Cisco Employee
Cisco Employee

Supported on Sup2/MSFC2/ Sup720 and only with ATA/Compact card file systems

6506#sh mod 1

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE SADxxxxxxxx

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

1 00d0.c0d4.bea8 to 00d0.c0d4.bea9 2.2 6.1(3) 12.1(26)E1 Ok

Mod Sub-Module Model Serial Hw Status

--- --------------------------- --------------- --------------- ------- -------

1 Policy Feature Card 2 WS-F6K-PFC2 SADxxxxxxxx 1.4 Ok

1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SADxxxxxxxx 2.3 Ok

Mod Online Diag Status

--- -------------------

1 Pass

6506#mkdir ?

disk0: Directory name

6506#mkdir disk0:

Create directory filename []?