06-04-2002 08:14 AM - edited 03-01-2019 10:00 PM
I'm trying to test Mobile IP in a lab. It's a simple set up:
Foreign Agent LAN---R5----Frame Relay----R4-----Home Agent LAN
However, I keep getting a rejected message out of debug ip mobile on R5 when I move a machine to that subnet. Anyone have this working that could review the following code to see what I've missed? TIA!
version 12.2
hostname R4
interface Loopback0
ip address 155.10.4.4 255.255.255.0
!
interface FastEthernet0/0
ip address 155.10.44.4 255.255.255.0
duplex auto
speed auto
ipx network 4
ipx output-gns-filter 1000
!
interface Serial0/0
ip address 155.10.45.4 255.255.255.0
encapsulation frame-relay
ip split-horizon
ipx network 40
frame-relay map ipx 40.0004.0004.0004 304
frame-relay map ipx 40.0005.0005.0005 304 broadcast
frame-relay map ip 155.10.45.4 304
frame-relay map ip 155.10.45.5 304 broadcast
no frame-relay inverse-arp
!
router mobile
!
router igrp 45
redistribute mobile metric 56 100 255 1 1500
network 155.10.0.0
!
ip mobile home-agent
!
end
R4#
R5#sh run
version 12.1
hostname R5
interface Loopback0
ip address 155.10.5.5 255.255.255.0
!
interface Ethernet0/0
ip address 155.10.25.5 255.255.255.0
ip mobile foreign-service
ipx network 50
!
interface Serial0/0
no ip address
encapsulation frame-relay
no frame-relay inverse-arp
!
interface Serial0/0.45 point-to-point
ip address 155.10.45.5 255.255.255.0
ipx network 40
frame-relay interface-dlci 403
!
router mobile
!
router igrp 45
redistribute ospf 1 metric 56 100 255 1 1500
passive-interface default
no passive-interface Serial0/0.45
network 155.10.0.0
!
ip mobile foreign-agent care-of Loopback0
!
!
end
R5#
R5#debug ip mobile
IP mobility events debugging is on
R5#u all
MobileIP: Ethernet0/0 add 155.10.44.100 rejected
06-11-2002 04:18 PM
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide