04-19-2005 09:18 AM - edited 03-02-2019 10:30 PM
I have been having a VPN issue recently and after speaking with my service prodvider they informed me that since I'm using NAT on my router and pptp I need to use NAT Passthrough.
I'm not sure how to configure this on a Cisco 1720 router running IOS 12.1.
Please Assist.
04-25-2005 10:36 AM
Microsoft PPTP tunneling is widely deployed and used to enable remote users to connect back to their corporate network in a secured fashion across the public internet. Currently Cisco IOS Network Address Translation (NAT) only supports PPTP tunneling when configuring "Static or Dynamic" 1 to 1 address translation. The Overload, or Port Address Translation (PAT) configuration is not supported. So each individual PPTP tunnel requires its own IP address.
04-25-2005 10:39 AM
if you use any access lists permitting gre in will do.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide