Can anyone tell me why I cannot get from the outside pointing at the outside address ( the dialer ) port 86, to port 23 on the inside,
The dialer is assigned a static address on connect. I can telnet into port 23 @ 10.10.10.2 from inside the router.
---------
Version
Cisco Internetwork Operating System Software
IOS (tm) C800 Software (C800-Y6-MW), Version 12.0(5)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Fri 23-Jul-99 01:30 by kpma
Image text-base: 0x000E9000, data-base: 0x00595000
ROM: TinyROM version 1.2(2)
Router uptime is 50 minutes
System returned to ROM by power-on
System image file is "flash:c800-y6-mw.120-5.T"
Cisco C802 (MPC850) processor (revision 1) with 43112K bytes of virtual memory.
Processor board ID JAD03500EH2
CPU part number 33
Bridging software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
1 ISDN Basic Rate interface(s)
4M bytes of physical memory (DRAM)
8K bytes of non-volatile configuration memory
8M bytes of flash on board (4M from flash card)
-------------------------
Router#show config
Using 1693 out of 8062 bytes
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Router
!
enable secret 5 xxxxxxxxxxxxxx
!
username xxxxxxxxx password 7 xxxxxxxxxxxxxx
!
!
!
!
ip subnet-zero
no ip source-route
ip dhcp excluded-address 10.10.10.1 10.10.10.34
!
ip dhcp pool bvd
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1 255.255.255.0
dns-server xxxxxxxxx
domain-name xxxxxxx.net
lease 10
!
isdn switch-type basic-ni
!
!
process-max-time 200
!
interface Ethernet0
ip address 10.10.10.1 255.255.255.0
no ip directed-broadcast
no ip proxy-arp
ip nat inside
!
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 xxxxxxxxxxx
isdn spid2 xxxxxxxxxx
!
interface Dialer1
description ISP
ip address negotiated
no ip directed-broadcast
no ip proxy-arp
ip nat outside
encapsulation ppp
no ip split-horizon
dialer remote-name Cisco1
dialer idle-timeout 180
dialer string xxxxxxx class DialClass
dialer hold-queue 10
dialer load-threshold 225 either
dialer pool 1
dialer-group 1
ppp pap sent-username xxxxxxx password 7 xxxxxxxxxxx
ppp multilink
!
ip nat inside source list 101 interface Dialer1 overload
ip nat inside source static tcp 10.10.10.2 23 interface Dialer1 86
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
map-class dialer DialClass
access-list 18 permit 10.10.10.0 0.0.0.255
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120 0
transport input none
stopbits 1
line vty 0 4
exec-timeout 0 0
login local
!
end
