cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
366
Views
0
Helpful
1
Replies

NonStop Forwarding problem

achampag
Level 1
Level 1

Hi,

We have a cisco 7200 which forms adj with ospf neighbors (extreme network summit switches).

Everyting was fine with IOS 12.0(3)T but when we upgraded to 12.3(4)T. all adj went down. To solve to problem we disableld the MD5 message digest for OSPF authentication.

Back in the lab we noticed that the problem was with NonStopForwarding. When we disabled NFS

router ospf

no capability lls

All adj came back up. But with lls enabled, the only way to bring the neighbors up is to disable MD5 auth, which is not a solution in our environnement.

Can anyone explain a bit moreon this since there is limited documentation on vendor compatibility with NonStopForwarding.

Regards

Alex

1 Reply 1

smif101
Level 4
Level 4

This sounds more like a bug, i would go back to the old version and then open a case with TAC.

Jason Smith

www.smif101.com