05-26-2004 02:57 AM - edited 03-02-2019 03:56 PM
Íello
We have some problems with a router 2691.
Would you mind to help me please or tell me where can I read about it.
We have a rapid growth of the input errors on the interface Fast Ethernet 0/0.
Nevertheless the value of traffic is not so much, about 50 mbit/sec.
The average size of the packets is about 100 kbyte.
The value of processor cpu is not great although (20-30 %)
The command show controllers FastEthernet 0/0 shows, that all errors are as matched above
rx_soft_overflow_err:
Number of Transmitter Hang = 0
tx_more_col_err= 0 tx_one_col_err= 0
tx_exc_collision_err= 0 tx_late_collision_err= 0
tx_underrun_err= 0 tx_error_intr= 0
rx_soft_overflow_err= 2916 rx_overflow_err= 0
And there is not another errors.
What does the parameter rx_soft_overflow_err= 2916 means?
And, which is more important, how to solve this problem?
Thanks a lot.
05-26-2004 03:39 AM
Did you say 50mbits?. This is quite much for a fast ethernet, (100mbits). It might be due to much traffic.
05-26-2004 05:13 AM
Thanks
You are right. But we have repeated this experiment. The real traffic, when we can observe this phenomena is about 5 10 mbit/sec. We continue observe the rapid growth of input errors. The value of the traffic is not great although. (<<100mbit/sec)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide