06-20-2002 01:57 PM - edited 03-01-2019 10:20 PM
Dear Sirs,
I would like to know if I can set a router 7500 to star a route-map at a time I can Select, for example, Could I start a route-map at 21:00 everyday and stop it 3 hours later?
Is there another process for doing this?
thanks in advance.
Carlos.
06-20-2002 02:16 PM
Carlos,
Time-based ACLs, in conjunction with your route-map, should get you want you want on this. The following is a link that would show you how to do this.
http://www.cisco.com/warp/public/793/access_dial/10.html
Note. this link is for ISDN DDR with Time-Based ACLS. If you write your ACL like this and apply this to your match criteria on your route-map it might give you the desired effects. Also this feature requires atleast 12.0T IOS.
Hope this helps,
Don
06-20-2002 06:58 PM
Thanks for Your Help.
It was so useful for us.
Carlos
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide