"NAT Integration with MPLS VPNs" function support

[nishiguro]

My customer is building the network which consisted of Cisco7200 with NPE-G1. Since the "NAT Integration with MPLS VPNs" function is needed in the network, it is required for there to be support by IOS 12.2T. However, NPE-G1 does not operate in 12.2T.

It seems that the function is operating correctly when I verified by NPE-G1+12.2(15)B.

Anyone know when "NAT Integration with MPLS VPNs" function will be supported in the IOS release12.2B?

Thanks,

[thisisshanky]

NPE G1 operates correctly with 12.1(14)E, 12.2(4)BW, 12.2(14)S, 12.2(15)B

But the feature you ask for are supported only in the following trains.

12.2(13)ZE

12.2(13)ZD

12.2(13)T

12.2(13)T1

[nishiguro]

Thank you for your quick responce! I understand that it is impossible to support this feature by Cisco 7200 w/NPE-G1.

I will suggest my customer to use the feature by NPE-400 for their network.

Does anyone have an experience using this feature? I am concerned about NPE-400 can have a good performance when this feature is configured on the 7200...

Thanks,

[nishiguro]

Anyone know if/when the "NAT Integration with MPLS VPNs" feature will be supported in the 12.1E, 12.2BW, 12.2S or 12.2B IOS release train?

My customer MUST use NPE-G1... :'-(

Thanks,