cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
433
Views
0
Helpful
2
Replies

racking up the 6500s switches

netman2k5
Level 1
Level 1

Could someone please send me the link on how to rack up the 6509/6513 switches ? I have not done it before. Thank you very much.

1 Accepted Solution

Accepted Solutions

spremkumar
Level 9
Level 9

Hi

This is a good link to check up and start up with the racking 6500 switches..

http://cisco.com/en/US/products/hw/switches/ps708/products_installation_guide_chapter09186a008020e0a9.html

from my personal exp you can rack it up easily without any linecards and fanmodules installed on it.

we did rack up some of the 6513 switches without any linecards and fan modules installed in them which would make it very easy for racking them up.

Also would suggestto take care of necessary power as well as grounding cable specs before powering them up..

regds

View solution in original post

2 Replies 2

spremkumar
Level 9
Level 9

Hi

This is a good link to check up and start up with the racking 6500 switches..

http://cisco.com/en/US/products/hw/switches/ps708/products_installation_guide_chapter09186a008020e0a9.html

from my personal exp you can rack it up easily without any linecards and fanmodules installed on it.

we did rack up some of the 6513 switches without any linecards and fan modules installed in them which would make it very easy for racking them up.

Also would suggestto take care of necessary power as well as grounding cable specs before powering them up..

regds

thank you very much, Sir.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: