I downloaded the new image into Cisco 2620, but now every time after loading a flash image and after checking RAM and board, the following error appears:
========================================
*** Watch Dog Timeout ***
PC = 0x808968ec, SP = 0x81112920
C2600 platform with 32768 Kbytes of main memory
=======================================
After this error, the router reboots. I dont know what to do as the prompt does not appear.
The full boot up sequence is:
=======================================
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x541314
Self decompressing the image : #################################################################
################################################################################
################################################################################
################################################################################
############## [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.0(3)T3, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 15-Apr-99 16:12 by kpma
Image text-base: 0x80008088, data-base: 0x80A05BAC
cisco 2620 (MPC860) processor (revision 0x600) with 24576K/8192K bytes of memory
.
Processor board ID JAD05500Z7J (3892636774)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
4 Voice FXS interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
*** Watch Dog Timeout ***
PC = 0x808968ec, SP = 0x81112920
C2600 platform with 32768 Kbytes of main memory
========================================
The IOS currently installed is:
IOS=c2600-is-mz.120-3.T3.bin
Kindly help.
Muhammad Waqar Khan
