I have a cat5500 with the rsm blade, (rsp2) using version 12.2(17a)and have started having this problem. The router will freeze, and then reload a portion of the code, but traffic stops while this is happening, I reload the full switch and it stops for about a month, but then starts again getting worse until it happens every couple of hours. Here is the example logs produced:
*Sep 25 00:37:41: %C5IP-0-MSG: slot0 %DB-0-RESTART: Waiting for restart
*Sep 25 00:37:42: %CBUS-3-CMDTIMEOUT: Cmd timed out, CCB 0x5800FF20, slot 0, cmd
code 2
-Traceback= 603FE914 603FEDC0 603F6BC4 603F4904 6030DFF4 6030E1EC
*Sep 25 00:37:42: %DBUS-3-DBUSINTERR: Slot 0, Internal Error
*Sep 25 00:37:45: %RSP-3-RESTART: cbus complex
*Sep 25 00:38:09: %LINK-3-UPDOWN: Interface Vlan0, changed state to up
*Sep 25 00:38:11: %LINK-3-UPDOWN: Interface Vlan10, changed state to up
*Sep 25 00:38:11: %LINK-3-UPDOWN: Interface Vlan20, changed state to up
*Sep 25 00:38:11: %LINK-3-UPDOWN: Interface Vlan21, changed state to up
*Sep 25 00:38:11: %LINK-3-UPDOWN: Interface Vlan110, changed state to up
*Sep 25 00:38:11: %LINK-3-UPDOWN: Interface Vlan150, changed state to up
*Sep 25 00:38:11: %LINK-3-UPDOWN: Interface Vlan200, changed state to up
I found a bug about the same error message cmd-timeout but has no info about how to fix it or what version will repair it. I can't afford the support on the device yet, so any help you provide would be greatly appreciated.
Thank You,
Jerel Howland
Senior Systems Engineer
