Setting up BGP

[dave99999]

Hello

I have 2 networks both of which are running ospf and they seem to be working fine. I am trying to use BGP to have both networks talk to each other.

I have been having some problems with that.

Do I need to set BGP on all my routers on each network? Or just the routers that are next to each other on the two networks?

Here are the commands I have used for the routers that are next to each other.

1st router

router bgp 400

network 172.24.0.0

neighbor 144.5.5.1 remote-as 500

2nd router

router bgp 500

network 144.5.0.0

neighbor 172.24.5.1

Am I missing commands?

Thanks

---Dave

[Harold Ritter]

If this is a test setup, just redistribute BGP into OSPF in both AS and it should be fine. You don't need to redistribute OSPG in BGP since you are using a network statement to originate the routes in BGP.

Hope this helps,