Other Network Architecture Subjects

Is there a way to stop HSRP from being "seen" on Windows XP client Personal Firewall? I have a customer who has 2 4506's running HSRP between VLAN interfaces and he is seeing HSRP traffic being detected by his client computers. I believe it's cosme...

I have two T-1s bundled via MLPPP, 2620 routers on both ends. One T-1 is a full 24 channel data T-1 thatterminates on the WIC with integrated CSU/DSU on both routers. The other T-1 uses 17 channels for voice, one for terminal printing and six for voi...

I would like to install ciscowork 2000 "cd one version 3" and the cpu is pentium 4. Can you give me some suggestion , please ?Thanks a lot.

Hi all,In the change Audit log i see USer name unknown ,what do i need to do if i have to see the users name who made changes to the router config.SUND.us.abc.com unknown Configuration Archive x.x.x.x 17 Sep 2004 11:35:25 EDT telnet Config Configure...

Hi all,How can I get a report generated for FAiled login attempts in the daily syslog and an alert generated thanks

Hi, I have installed CW2000 with RME and Campus Manager,everything is working fine except when Iwant to do a custom report in RME...There is an error stated that I haven't enable the logging in the device,but i'm sure that i have enable all the loggi...

Did anyone experience the number of devices reported by RME at various intervals. Even though no changes in network or devices occured.

If ANI server shuts down the Campus manager still shows process runing. is there a way to trigger a notification or alarm or a way to kill teh ANI server process within Campus.

Hi,I have 2 6513 Catalysts with MSFC and 720 Supervisor each.I have configured Interface GigabitEthernet 1/48 , and interface GigabitEthernet 2/48. Interface Giga1/48 is being used for connecting a single PC. The interface Giga2/48 is being used for ...

I have connected a 6513 to a 5513, no problems. But when I enable HSRP between the RSM and the MSFC the I have issues with the Vlans with bridge-group 1 set up. ie,RSM 5513 interface Vlan1 description Management and Trunking ip address 10.1.1.1 255.2...

Hi;having a slight problem here. i want to separate one group of users from the rest of my network, they only need access one one specific application at one specific address. Here is the setup.......I have a 2950 that I'm using as well as a cluster...

Hi all,i've new cat 2950 and i saw that, when i configure a VTP domain, it doesn't appear in show run configuration, why???ThanlsMarco

hi,Trying to achieve this. 2 sites with 2 routers each, and each router is having a leased line to the other end. BGP is the routing protocol.1) Does the BGP knows if link A is down, it will use link B? Do i need to configure some kind of BGP attribu...

Hi,Thinking of adding another switch for redundancy and connect it to the existing C1924. A DC switch is needed so a C2950G-EI-DC was selected. How do I connect the 2 on the same subnet if the 2950G doesn't seem to have an uplink port?Thanks