Show Platform command ?

[vladrac-ccna]

Hello everyone,

Does anyone know if we (not cisco employers) will be ever granted the privilege of having full documentation for the output of these commands?

switch# sh platform ?

chassis show platform chassis debug state

cpu show CPU related information

crashdump show most recent crashdump

environment show environment variable related information

hardware show platform hardware debug state

health show platform statistics gauging health of the system

logfeatures show enabled debugging log features

mapping show internal mappings

memory show SDRAM or hardware registers

software show platform software debug state

"Usage Guidelines

You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so. "

Vlad

[Prashanth Krishnappa]

The outputs of sh platform commands are not intuitive and one will need a detailed architecture knowledge including code names to decipher them. No current plans on documenting all the commands. Most needed commands are sort of documented in troubleshooting documents. Example, is the following high cpu document

http://www.cisco.com/warp/public/473/cat4500_high_cpu.html

[vladrac-ccna]

Thanks for the reply,

vlad

[ruyi.liDLChina]

You know.i have one command as below

show platform os sys all  

I don't know where it came from ?

[ruyi.liDLChina]

and i also dont know what it means