06-26-2002 07:01 AM - edited 03-01-2019 10:45 PM
We have a HP NNM which is not picking up traps for a failed power supply in a 3662. Other Traps are coming through and the NNM manager is just one hop away. Do the Environ traps trigger in the event of a power supply failure?
The config is
snmp-server community xxxx RO 2
snmp-server community xxxx RW 2
snmp-server trap-source Loopback0
snmp-server enable traps config
snmp-server enable traps envmon
snmp-server enable traps frame-relay
snmp-server host x.x.x.x public
snmp-server host x.x.x.x public
06-26-2002 08:37 AM
http://www.cisco.com/warp/public/477/SNMP/snmp_traps.html is a good starting point. You may want to start from here.
06-27-2002 12:14 AM
I've had a look at this document but it does not definitively state whether the Environ trap reports Power supply failures. Is there any resource that points me in this direction?
06-27-2002 01:38 PM
Yes, http://www.cisco.com/warp/public/477/SNMP/snmp_traps.html does provide detailed info on wht kind of traps are available under the envmon MIB for the router and you can look at the object definition for more details. The closest that you can get from the this MIB is the ciscoEnvMonRedundantSupplyNotification trap.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide