Other Network Architecture Subjects

We have a HP NNM which is not picking up traps for a failed power supply in a 3662. Other Traps are coming through and the NNM manager is just one hop away. Do the Environ traps trigger in the event of a power supply failure?The config is snmp-server...

Hi,there seems to be a problem with configuration of EIR/CIR ratio greater than 2 for Frame Relay connections on FRSM/FRSM-c cards on MGX8220/8850 platform. For instance, when port speed is configured for 256 k, and CIR=64k, Bc=8000, Be=24000 (theor...

Hi AllIs the Routershelf for the AS5800 "the 7206VXR" is supporting the aggregation via E1 IMA WAN module.As I know that the normal 7206 is supporting such module, so is there any thing to make that not possible for the Routershelf

I am trying to use the internet to connect an existing statmux network. The statmux supports frame relay as an output protocol on an RS232 interface.Statmux--1720--Internet--3640--StatmuxThe internet connection is via the ethernet port on DSL routers...

When pinging, my hp analyzer flags Non Zero CPI and CRC-32 errors in the EOM Cell, before entering the ATM cloud The Ping does not time - out.Config: PC ---- 5500 ---- CLOUD ---- 2924 ---- PCIt's my understanding that the CPI should be 0. I'm assu...

Hello,I want to account the traffic from/to a specific AS in a multihomedBGP environment. Measuring the traffic sent to this AS is no problemwith policy accounting. But how to count the traffic received from this AS using policy accounting?RegardsMic...

How can I find the switch port to which my pc is connected?

I am looking for a cheaper option to a dedicated network management box like packeteer or WiseWan 401.I would like to know if Upstream rate limiting is possible on a 7200 router. I have no access on our ISP's router so I need to apply something on my...

Hi, the TTL field in the IP header is 8-bit. So, the max number of hops of IP packet never exceed 255. But, what is the real max. number of hops that an IP address can traverse from the source host to the destination host? P.S. 255 hops can be exhaus...

We need the job time default to go to "once" instead of "immediate" in Netconfig.How is this done? Registry? Text file?URL would be great!

Is it possible to write configuration scripts that you could then run as a batch file to configure a router? And if so could someone point me in the right direction for finding out how to write them, ie what language etc.

when installing CWW6.0 and QPM2.1 on a Win2K PC is it possible to use service pack 2 ?

hellowe're using a cisco5300 for e1 dialup connections. as the ras is located in a public place , the e1 cable frequenty becomes dislocated from the ras. i m not so familiar with snmp. it seems typing in my linux machine "snmpget router_name commu...

I have a 1720 Router with the modular WAN interface slots.Which Wan Interface Card do I need to facilitate my PPP frame-relay between 2 buildings at 256K?

We have recently moved from a non-switched environment to a Cisco 4006. Boot-up times using DHCP seem to have increased significantly with users. We have auto-negotiation turned off, with all 10M half-duplex, until we upgrade our cable plant to Cat-5...