Recently I have a SOHO 71 in my possession. After configure VPDN enable without no success. I decided to reload IOS image. I use console download by using Xmodem. After success download, router reboot and then goes in cycle that keep rebooting itself with follow message.
Any thought would be greatly appreciated. Kevin Chen
Cisco Internetwork Operating System Software
IOS (tm) SOHO71 Software (SOHO71-OY6-M), Version 12.2(11)YV, EARLY DEPLOYMENT RE
LEASE SOFTWARE (fc1)
Synched to technology version 12.2(13.1u)T
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 21-Jan-03 00:03 by ealyon
Image text-base: 0x800131C0, data-base: 0x8066A664
CISCO SOHO71 (MPC855T) processor (revision 0x401) with 14848K/1536K bytes of mem
ory.
Processor board ID VMS0615031D (236382490), with hardware revision D726
CPU rev number 5
Bridging software.
2 Ethernet/IEEE 802.3 interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)
SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
%Software-forced reload
Unexpected exception to CPUvector 700, PC = 80133788
-Traceback= 80133788 80113ABC 801159D4 8010F104 8008E168 8008DFAC 800EF950 800EF
A50 80087BD8 80089598 8009A974 8009AA70 8009AB6C 80148860 80144328 8013E7E4 8014
6260
Program (breakpoint) Exception (0x700)!
CPU Register Context:
VEC = 700 PC = 80133788 MSR = 29032 CR = 33005055
LR = 80133738 CTR = 8006E6CC XER = 8000007F
R0 = 80133738 R1 = 80A11C60 R2 = 80910000 R3 = 8095EAB4
R4 = FFFFFFFE R5 = 0 R6 = 80A11C38 R7 = 80860000
R8 = FF000000 R9 = 0 R10 = 9032 R11 = 8095EA4C
R12 = 2268 R13 = FFF324E0 R14 = 369 R15 = 80976680
R16 = 1 R17 = 1 R18 = 800ED45C R19 = 14
R20 = 80A2ECAC R21 = 0 R22 = 806AC6E4 R23 = 0
R24 = 8010F100 R25 = 0 R26 = 8010F100 R27 = 1B0
R28 = 0 R29 = 80973C28 R30 = 0 R31 = 0
Stack trace:
PC = 80133788, SP = 80A11C60
Frame 00: SP = 80A11C60 RA = 80113ABC
Frame 01: SP = 80A11C70 RA = 801159D4
Frame 02: SP = 80A11C98 RA = 8010F104
Frame 03: SP = 80A11CD0 RA = 8008E168
Frame 04: SP = 80A11D20 RA = 8008DFAC
Frame 05: SP = 80A11D60 RA = 800EF950
Frame 06: SP = 80A11D70 RA = 800EFA50
Frame 07: SP = 80A11D90 RA = 80087BD8
Frame 08: SP = 80A11D98 RA = 80089598
Frame 09: SP = 80A11DC0 RA = 8009A974
Frame 10: SP = 80A11E10 RA = 8009AA70
Frame 11: SP = 80A11E40 RA = 8009AB6C
Frame 12: SP = 80A11E48 RA = 80148860
Frame 13: SP = 80A11E70 RA = 80144328
Frame 14: SP = 80A11E88 RA = 8013E7E4
Frame 15: SP = 80A11EB0 RA = 80146260
Frame 16: SP = 80A11EC0 RA = 80146454
Frame 17: SP = 80A12120 RA = 80067FE8
Frame 18: SP = 80A12128 RA = 80058108
Frame 19: SP = 80A12168 RA = 801384BC
Frame 20: SP = 80A12268 RA = 0
*** System received a Software forced crash ***
signal= 0x17, code= 0x700, context= 0x80976120
PC = 0x80133788, Vector = 0x700, SP = 0x80a11c60
System Bootstrap, Version 12.2(4r)XM1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2001 by cisco Systems, Inc.
C800/SOHO series (Board ID: 17-117) platform with 16384 Kbytes of main memory
program load complete, entry point: 0x80013000, size: 0x345c8c
Self decompressing the image : #################################################
#########
