10-03-2001 06:31 AM - edited 03-01-2019 06:49 PM
We are in the process of testing our new network infrastructure which consists of a 6509 Catalyst enterprise switch and numerous Catalyst 3500 series workgroup switches.
Since the 6509 is the hub, is it possible to make this the root bridge or do the switches elect a root bridge based purely upon priority and MAC address ?
any help appreciated.
10-03-2001 09:15 AM
Here is the command reference:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/cmd_ref/setsy_tr.htm#42195
Its based vlans....
10-10-2001 08:25 AM
i believe the commands are -
set spantree root (as primary)
set spantree root secondary (as secondary)
10-18-2001 04:32 PM
set spantree root (vlan)
set spantree priority 1 (vlan)
on the 6509
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide