Hello all,
Its my first time posting on these forumns. I am in need of some help. Here is my problem. I have 2 gbic interfaces on 2 5500 catalyst switches. I can't seem to get one of the gbic's to link with another gbit. here is the output when I do a "sh port 3" on the main switch.
NetworkCat> (enable) sh port 3
Port Name Status Vlan Level Duplex Speed Type
----- ------------------ ---------- ---------- ------ ------ ----- ------------
3/1 5500 trunk 1 connected trunk normal full 1000 1000BaseSX
3/2 5500 trunk 2 notconnect 3 normal full 1000 Unknown GBIC
3/3 notconnect 1 normal full 1000 No Connector
3/4 notconnect 1 normal full 1000 No Connector
3/5 notconnect 1 normal full 1000 No Connector
3/6 notconnect 1 normal full 1000 No Connector
3/7 notconnect 1 normal full 1000 No Connector
3/8 notconnect 1 normal full 1000 No Connector
3/9 notconnect 1 normal full 1000 No Connector
Port 3/2 is the one in question. The "Unknown GBIC" is throwing me and i can't find much help on ciscos site. Also here is a "sh ver" on the switch as well.
WS-C5500 Software, Version McpSW: 6.4(1) NmpSW: 6.4(1)
Copyright (c) 1995-2003 by Cisco Systems
NMP S/W compiled on Jan 22 2003, 16:26:22
MCP S/W compiled on Jan 22 2003, 16:20:39
System Bootstrap Version: 3.1.2
Hardware Version: 1.3 Model: WS-C5500 Serial #: XXXXXXXXX
Mod Port Model Serial # Versions
--- ---- ---------- --------- ----------------------------------------
1 2 WS-X5530 XXXXXXXXX Hw : 2.0
Fw : 3.1.2
Fw1: 4.2(1)
Sw : 6.4(1)
WS-F5521 XXXXXXXXX Hw : 1.0
WS-U5531 XXXXXXXXX Hw : 1.1
3 9 WS-X5410 XXXXXXXXX Hw : 1.0
Fw : 4.2(5)
Fw1: 4.2(5)
Sw : 6.3(1)
4 24 WS-X5225R XXXXXXXXX Hw : 3.3
Fw : 4.3(1)
Sw : 6.4(1)
5 24 WS-X5234 XXXXXXXXX Hw : 1.1
Fw : 4.5(2)
Sw : 6.4(1)
7 24 WS-X5234 XXXXXXXXX Hw : 1.1
Fw : 4.5(2)
Sw : 6.4(1)
8 12 WS-X5213A XXXXXXXXX Hw : 2.2
Fw : 3.1(1)
Sw : 6.4(1)
9 12 WS-X5213 XXXXXXXXX Hw : 1.2
Fw : 1.4
Sw : 6.4(1)
10 12 WS-X5213A XXXXXXXXX Hw : 2.2
Fw : 3.1(1)
Sw : 6.4(1)
11 12 WS-X5213A XXXXXXXXX Hw : 2.2
Fw : 3.1(1)
Sw : 6.4(1)
12 12 WS-X5213A XXXXXXXXX Hw : 2.1
Fw : 3.1(1)
Sw : 6.4(1)
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65536K 22180K 43356K 8192K 6019K 2173K 512K 254K 258K
(Note: Please keep in mine that i have not been on a Cisco switch in over 1 1/2 years so i am a bit rusty. I also inherited this from the last sysadmin so i am trying to clean up some problems)
Thank you.
