switching between scopes

[generalee]

One of the scopes that is configured in DHCP is not being used. My thinking is that there might be a problem on the switch, which it is not switching between the three scopes that I have configured? Can you provide me some tips? I don't know much about tweaking the configuration on a switch to get it to switch between scopes. Thanks much.

[ahbanks]

Do you have a VLAN interface configured?

This config should work:

int g 2/0

switchport access vlan 200

!

interface vlan 200

ip address 2.2.2.1 255.255.255.0

!

ip dhcp pool v200

network 2.2.2.0 255.255.255.0

dns-server 1.1.1.1

default-router 2.2.2.1

HTH!

[generalee]

Yes, we have three vlans. Thanks for your input!