cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3085
Views
0
Helpful
1
Replies

The deference between V1 and V2 on Fan tray(ASR-9006-FAN) for ASR9006

Muradazz
Level 1
Level 1

Dears All 

I installed a new Fan tray( ASR-9006-FAN )to my box beside the first one ASR-9006-FAN -v2 for ASR9006 and i need to know what is the deference between the two versions and is that effect the service? 

 

0/FT0/SP ASR-9006-FAN READY
0/FT1/SP ASR-9006-FAN-V2 READY

1 Accepted Solution

Accepted Solutions

Hi, 

ASR-9006-FAN  is EOL announced and replacement part is ASR-9006-FAN-v2.

 

https://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/eos-eol-notice-c51-737924.html

 

normally, new product is releasing with several improvements. FAN modules are not affecting to network traffic directly but adversely under different circumstances. such as , if fan module not working, device heat is getting high and device may reboot.

 

 

Rate this and mark as answer if this solved your concern

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

View solution in original post

1 Reply 1

Hi, 

ASR-9006-FAN  is EOL announced and replacement part is ASR-9006-FAN-v2.

 

https://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/eos-eol-notice-c51-737924.html

 

normally, new product is releasing with several improvements. FAN modules are not affecting to network traffic directly but adversely under different circumstances. such as , if fan module not working, device heat is getting high and device may reboot.

 

 

Rate this and mark as answer if this solved your concern

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB