Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello, i have this alert on my monitoring system came from ASR1006 /1009 routers with "A notification indicating that number of active session from a particular client Ethernet MAC address has reached the configured per MAC limit 10. There won't be...
Hello everyone, and have a nice day i can see an error on my monitoring system for my ASR9006 router like this"Facility: PLATFORM-ENVMON; Severity: warning; Message Name: OP_SFP_WARN; Message Text: Port 0/07: Unable to get SFP data. Reason: No such ...
Dears All I installed a new Fan tray( ASR-9006-FAN )to my box beside the first one ASR-9006-FAN -v2 for ASR9006 and i need to know what is the deference between the two versions and is that effect the service? 0/FT0/SP ASR-9006-FAN READY0/FT1/SP ASR...
Dears i connect SFP 1G to NX3132Q on the interface 1/1/3 and the link still down is this not compatible murad-NX# sho int eth1/1/3 transEthernet1/1/3transceiver is presenttype is 1000base-LHname is CISCOpart number is FTLF1318P3BTL-C1revision is As...
Hi,recently i saw this MSG. on the log file but i cant understand what is the cause route of it LC/0/0/CPU0:Feb 26 21:46:30.694 UTC: fib_mgr[184]: %ROUTING-FIB-4-RETRYDB_NONEMPTY : One or more FIB object(s) have been in IPv4 retry queue for at least...
To return the CPU Board Temp on ASR 9010 0/0/CPU0 1.3.6.1.2.1.47.1.1.1.1.7.3001To get the actual temperature for CPU Board Temp on ASR 90100/0/CPU0: 1.3.6.1.4.1.9.9.91.1.1.1.1.4.3001
Thanks yes it is working with me also to upgrade to nxos.7.0.3.I2.2b.bin NX3000# install all nxos bootflash:bootflash:/// bootflash://sup-1/ bootflash://sup-local/bootflash://module-1/ bootflash://sup-active/NX3000# install all nxos bootflash:///boo...
hello i have another probe :after i reconfigure the switch i cant configure speed 10000 on the port eth1/1/1 and i can see the port lis is chanced to this NX3000# conf tEnter configuration commands, one per line. End with CNTL/Z.NX3000(config)# i...
hello Balaji,yes my device is Cisco Nexus 3132Q-X Switch32 QSFP+ - each supports native 40 Gigabit Ethernet and 4 x 10 Gigabit Ethernet modes4 SFP+ ports that are internally multiplexed with the first QSFP+ porti installed 1Gig SFP on the interface...
thank you for your support this platform is ASR9006 Cisco IOS XR Software, Version 6.7.1[Default]Copyright (c) 2020 by Cisco Systems, Inc.ROM: System Bootstrap, Version 0.76(c) 1994-2012 by Cisco Systems, Inc.HB-AHL00-CSASR9-PE01 uptime is 14 weeks...
