03-30-2014 12:29 PM - edited 03-03-2019 07:20 AM
Please tell me why the secondary in my vPC pair of Nexus 5k's give this failure error and the primary shows no connection errors at all:
sh vpc
Legend:
(*) - local vPC is down, forwarding via vPC peer-link
vPC domain id : 1
Peer status : peer adjacency formed ok
vPC keep-alive status : peer is alive
Configuration consistency status : success
Per-vlan consistency status : success
Type-2 consistency status : failed
Type-2 inconsistency reason : SVI type-2 configuration incompatible
vPC role : secondary
Number of vPCs configured : 0
Peer Gateway : Disabled
Dual-active excluded VLANs : -
Graceful Consistency Check : Enabled
Auto-recovery status : Disabled
vPC Peer-link status
------------------------------
id Port Status Active vlans
-- ---- ------ ------------------------------
1 Po1 up 1-2,18,28,50,120,140
03-30-2014 12:29 PM
06-21-2014 08:59 AM
HI ,
Best to do a "show vpc consistency-parameters global" and ensure all your
vlans between the N5K pairs are the same. It will show you table comparing the parameters set on both N5Ks so you could easily spot the difference. :)
HTH.
Jay Ocampo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide