10-14-2005 03:18 AM - edited 03-03-2019 12:25 AM
We have a customer with an HP 2824 switch which is the "core" of the lan and a cisco 3550Poe which should carry both voice and data traffic.
The cisco has 2 VLAN ( 100,102) for the two kind of traffic . A Gb port on both switch has been configured for trunking ( hp has the TAG term for it ) , however traffic seems not to go through .
Has anyone had the same problems ?
Thanks
10-14-2005 03:50 AM
You have to maunally TAG each and every vlan on the trunk between the Cisco and the HP switch. One of our client faced the same problem and it got it solved by tagging each vlan on the port connecting to cisco switch.
regards,
-amit singh
10-14-2005 04:51 AM
We've already tagged each VLAN on the HP switch
10-14-2005 05:10 AM
Hi ,
solved the problem.
we had to untag the trunk port from the native vlan on the HP switch
thanks all
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide