VLAN Trunk Port Speed

[utawakevou]

Im setting up a test on VLAN and inter-VLAN routing where I use a 2950 and a 1751 router. I have set-up 2 VLAN's from the switch and have trunk one of the port. Using a CAT 5 patch lead, I connect it to the switch trunk port and to the router fastethernet port. I did configure fastethernet0/0.1 and fastethernet0/0.2 and encapsulate it with dot1Q. So far everything are working OK.

Since it is a 10/100 connectivity, I just want to know how will the bandwidth be shared by all the 3 VLANS (VLAN 1 is my management VLAN).

thanks

[mehrdad]

there isn't any sharing

[utawakevou]

Then what is the bandwidth of one VLAN ? is it up to 100Mbps ??

[mehrdad]

yes up to 100Mbps (there is a little 802.1q overhead, four octets to each frame http://www.zyxel.com/support/supportnote/ies1000/image/8021q.gif)