09-18-2003 04:35 AM - edited 03-02-2019 10:25 AM
I'm setting up a small vlan test on a 1 cat2950
i have 2 ports on vlan 1
2 ports on vlan 200
i want some form of communication between the 2 vlans
whatever way i configure the trunk it never seems to allow this.
if anyone could help i would be grateful
thanks
09-18-2003 04:41 AM
The only way i know to do it is to configure VLAN Routing.
09-18-2003 04:52 AM
can i do this using the cat2950
could you point me in the right direction?
as you can probably tell i'm new to cisco hardware
and configuing
thanks
09-18-2003 05:19 AM
Hi,
here is the URL: http://www.cisco.com/warp/public/473/howto_L3_intervlanrouting.pdf
or http://www.cisco.com/warp/public/473/50.pdf
But you need a router or L3 switch to do that.
Regards,
Milan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide