08-04-2005 06:03 AM - edited 03-02-2019 11:36 PM
I'm trying to configure a Vlan Dynamic Membership but I am not very clear on where do I have to store the database configuration file and wich commands to I have to use to make it work properly.
Can somebody help me?
What a database configuration file looks like?
Thanks
Regards
08-04-2005 06:15 AM
Please go through the link and this will come handy.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_7_6/confg_gd/vmps.htm
regards,
-amit singh
08-04-2005 06:20 AM
Hi CSCO,
Database config file is stored on tftp server. Now this tftp server can be on an or somewhere behind your router.
This link will give you a clear picture how the topology will look like.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12113ea1/2950scg/swvlan.htm#1036967
See how database config file looks like
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_6_2/_config/vmps.htm#17551
Now you need to have some high end switch like 5000 which will work as vmps server and tftp server which will connected to 5000 switch where you will store your database file and other switches will be working as vmps client which wil send the request to the VMPS server which will be 5000 switch and 5000 switch will already download the config file from the tftp server.
The 2 links which I have pasted above will also give you a very good ides how to configure VMPS server as well as VMPS client.
HTH
Ankur
08-04-2005 08:16 AM
u need tftp server where u put vmps file reside in root directory of tftp server,1 switch that support vmps like 2980,swith belong 2 vmps domain(same as switch vtp domain).Define ip add of tftp server in vmps,set vmps state enable,set vtp mode.
Finally type below line in notepad and put in tftp root directory....
vmps domain xyz
vmps mode open
vmps fallback none
vmps no-domain-req deny
address 0009.23ac.3e12 vlan-name abc
last line show the database of user
regards...
Ashish Singh
08-04-2005 08:15 PM
Hi,
U need to install TFTP server at any windows machine,and define ip address of that pc in vmps server.if vmps server and pc are in differenet subnet then u need to define a default gateway also.
Finally type below line in notepad and put in tftp root directory....
vmps domain xyz
vmps mode open
vmps fallback none
vmps no-domain-req deny
address 0009.23ac.3e12 vlan-name abc
last line show the database of user
as u type "download vmps" at vmps server this cmd fetch vmps file from tftp server and download it into vmps database.
regards...
Ashsih Singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide