02-22-2006 06:20 AM - edited 03-03-2019 01:57 AM
Hi,
Does anyone know if a similar command of catos command 'set port vtp X disable' exists in native IOS (12.1E or 12.2SX) on cat6500?
We still can play in native IOS with VTP pruning, transparent mode but it seems that we can no more disable VTP on a particular port/interface.
Many thanks.
Regards/Ludovic.
02-22-2006 08:21 AM
Hi Ludovic,
I checked on this for you, and there is no way in IOS to disable VTP on an interface. Why do you want to disable VTP for a specific interface? Maybe there's another way to do what you are trying to accomplish.
HTH,
Bobby
02-22-2006 09:36 AM
While one may not be able to disable VTP directly, I would think you could use a MAC ACL against the VTP MAC address of 01-00-0C-CC-CC-CC. (See http://www.cisco.com/en/US/partner/tech/tk389/tk689/technologies_tech_note09186a0080094c52.shtml for details on how that addressing works.)
See http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_configuration_guide_chapter09186a00801679f8.html#wp1359352 for details on the command syntax.
Hope this helps. Please rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide