Re: who know what faction does module 4019 have?

kxiangrong · ‎11-01-2004

This card is assembled on my catlyst 4006 swith, now it works in a abnormal states - the indicator light is always in RED.

But i don't know what faction it has. And where can I find details about it.

Prashanth Krishnappa · ‎11-02-2004

WS-X4019 is the accelerator module for Supervisor 2 engine in a CAT4006? What do you mean by faction?

Can you paste the outputs of sh mod, sh test , sh health 1

kxiangrong · ‎11-03-2004

I want to know if I don't use this module what influence will be brought to my 4006?

The outputs is below, please help me

========================================

jzc4006-1> (enable) sh mod

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X4013 no ok

2 2 34 Router Switch Card WS-X4232-L3 no ok

3 3 0 Switch Fabric Module WS-X4019 no faulty

4 4 6 1000BaseX Ethernet WS-X4306 no ok

5 5 6 1000BaseX Ethernet WS-X4306 no ok

6 6 6 1000BaseX Ethernet WS-X4306 no ok

Mod Module-Name Serial-Num

--- -------------------- --------------------

1 JAB0

2 JAB0

3 JAB0

4 JAE0

5 JAE0

6 JAE0

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-04-dd-e9-57-00 to 00-04-dd-e9-5a-ff 1.5 5.4(1) 7.5(1)

2 00-02-16-f6-0d-c4 to 00-02-16-f6-0d-e5 1.5 12.0(7)W5( 12.0(18)W5(22b)

3 00-01-96-96-d7-26 1.0

4 00-02-16-e8-07-da to 00-02-16-e8-07-df 2.0

5 00-02-16-e8-0b-16 to 00-02-16-e8-0b-1b 2.0

6 00-02-16-e8-08-d6 to 00-02-16-e8-08-db 2.0

jzc4006-1> (enable) sh test 3

Diagnostic mode (mode at next reset: complete)

Module 3 : 0-port Switch Fabric Module

Status: (. = Pass, F = Fail, U = Unknown)

Switch Fabric Module Status: F

Backplane ports 1 2 3 4 5 6

---------------------------

. . . . . F

kxiangrong · ‎11-03-2004

jzc4006-1> (enable) sh health 1

Physical memory pages: 81% allocated 3004 pages free

%CPU %CPU RunTimeMax Priority Average %CPU Total

Target Actual Target Actual Fg Bg 5Sec Min Hour CPU

Lj-poll 1.0 0.0 2 1 100 500 0 0 0 0:00

Pim-review 0.1 0.0 1 1 100 500 0 0 0 0:00

Ebm-host-review 1.0 0.0 8 0 100 500 0 0 0 0:00

Ebm-port-review 0.1 0.0 1 0 100 500 0 0 0 0:00

Protocol-aging-revie 0.2 0.0 2 0 100 500 0 0 0 0:00

Pip-pathTable-review 2.5 0.0 8 0 100 500 0 0 0 0:00

Epc-path-check-revie 5.0 0.3 12 7 100 500 2 2 0 0:02

Epc-pimState-review 0.1 0.0 1 0 100 500 0 0 0 0:00

Epc-audit 0.1 0.0 1 0 100 500 0 0 0 0:00

ScxMan-gigaport-revi 0.5 0.5 4 5 100 500 1 0 0 0:00

ScxMan-vlanInfoTable 1.0 0.1 8 0 100 500 0 0 0 0:00

ScxTripleK1Man-pathT 5.0 1.0 8 4 100 500 1 0 0 0:00

ScxTripleK1SwitchMan 45.0 1.3 20 10 25 500 2 2 0 0:02

ScxMan-mct-review 0.5 0.1 4 1 100 500 0 0 0 0:00

ScxMan-mct-review 0.5 0.0 4 1 100 500 0 0 0 0:00

SknmpPortMan-JobEven 1.5 0.3 15 1 100 500 0 0 0 0:00

SknmpPortMan-Dynamic 0.1 0.0 1 0 100 500 0 0 0 0:00

SknmpMacNotification 1.5 0.0 15 0 100 500 0 0 0 0:00

Sorted Host Table - 2.5 0.0 25 0 100 500 0 0 0 0:00

Sknmpcam-delete-dyna 1.0 0.0 8 0 100 500 0 0 0 0:00

GalChassisVp-review 2.0 0.2 20 18 100 500 0 0 0 0:00

S2w-JobEventSchedule 10.0 1.0 40 7 100 500 1 1 0 0:01

Stub-JobEventSchedul 10.0 0.8 30 4 100 500 1 1 0 0:00

Cpu utilization: 100%

Memory allocated by sbrk: 8304 kbytes

Total paths (valid and invalid): 317

Current free paths available: 0

kxiangrong · ‎11-03-2004

Allocation ceiling Current allocation

------------------ ------------------

kbytes % in use kbytes % in use

EbmVlans 1568.00 0% 385.11 1%

EbmPorts 184.00 25% 46.00 100%

EbmVlanHostEntries 640.00 0% 320.00 0%

EbmVlanGroupEntries 1152.00 0% 72.00 0%

EbmPortHostEntries 384.00 0% 24.00 0%

EbmIeNodes 544.00 0% 272.00 1%

PimPhyports 824.00 26% 226.41 95%

PimPorts 268.00 26% 73.31 95%

PipPaths 14336.00 0% 112.00 30%

VbufNodes2400 80.00 0% 19.69 0%

VbufNodes1600 56.00 0% 13.44 0%

VbufNodes400 68.00 16% 16.25 68%

VbufNodes64 48.00 3% 23.00 7%

SesNodes 84.00 4% 80.00 5%

ScxTripleK1Paths 3072.00 0% 24.00 30%

SbiAddrVlanTabEntrys 20.00 10% 20.00 10%

SknmpSynIfTsmItEntry 56.00 7% 5.39 80%

SknmpCamAddrEntrys 240.00 0% 60.00 0%

Linecard 1's Store 258.00 17% 44.98 100%

Linecard 2's Store 258.00 45% 117.66 100%

Linecard 3's Store 258.00 18% 47.21 100%

Linecard 4's Store 258.00 18% 46.54 100%

Linecard 5's Store 258.00 18% 46.54 100%

Linecard 6's Store 258.00 18% 46.54 100%

No free software paths last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

PipPath reclamation last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

Switch Chip 0 Stats:

Cpu queue drops: 0 Multicast queue drops: 0

CpuTx drop count due to No Packet Buffers: 0

Vpd misses last 5 seconds last minute last hour

Events per second 2.66 2.87 0.00

Percent cpu utilization 0.28 0.26 0.00

Total : 395 Total milliseconds spent handling: 327

Fast forwards last 5 seconds last minute last hour

Events per second 6.28 5.23 0.00

Percent cpu utilization 0.15 0.13 0.00

Total : 822 Total milliseconds spent handling: 196

Buffer overflows last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

Error packets last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

Software phyport packets last 5 seconds last minute last hour

Events per second 4.62 1.23 0.00

Percent cpu utilization 0.11 0.03 0.00

Total : 164 Total milliseconds spent handling: 39

Vpd collisions for Chip 0 last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

kxiangrong · ‎11-03-2004

Switch Chip 1 Stats:

Cpu queue drops: 0 Multicast queue drops: 0

CpuTx drop count due to No Packet Buffers: 0

Vpd misses last 5 seconds last minute last hour

Events per second 0.00 3.65 0.00

Percent cpu utilization 0.00 0.09 0.00

Total : 981 Total milliseconds spent handling: 227

Fast forwards last 5 seconds last minute last hour

Events per second 14.91 12.89 0.00

Percent cpu utilization 0.50 0.41 0.00

Total : 2223 Total milliseconds spent handling: 677

Buffer overflows last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

Error packets last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

Software phyport packets last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

Vpd collisions for Chip 1 last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

Switch Chip 2 Stats:

Cpu queue drops: 0 Multicast queue drops: 0

CpuTx drop count due to No Packet Buffers: 0

Vpd misses last 5 seconds last minute last hour

Events per second 0.00 3.39 0.00

Percent cpu utilization 0.00 0.08 0.00

Total : 964 Total milliseconds spent handling: 214

Fast forwards last 5 seconds last minute last hour

Events per second 13.99 11.83 0.00

Percent cpu utilization 0.47 0.38 0.00

Total : 2011 Total milliseconds spent handling: 614

Buffer overflows last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

Error packets last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

Software phyport packets last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

Vpd collisions for Chip 2 last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

kxiangrong · ‎11-03-2004

Interconnect VPD misses

Src Chip <===> Dst Chip VPD misses

-------- -------- ----------

0 <===> 1 0

0 <===> 2 0

1 <===> 0 0

1 <===> 2 0

2 <===> 0 0

2 <===> 1 0

Demote idle path to ff last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

Unload idle ff from VPD last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

No VbufNode available last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

-------------------------------------------------------------------------------

NMP process: 15372288 bytes(text/data), 20971520 bytes(heap+stack)

%CPU %CPU RunTimeMax Priority Average %CPU Total

Target Actual Target Actual Fg Bg 5Sec Min Hour CPU

Vc5-execute-nmp 30.0 81.1 12 8 100 500 80 60 0 1:38

Vc5-scp-service 2.5 0.1 12 13 100 500 0 0 0 0:00

Vc5-synergy-service 5.0 0.7 16 4 100 500 1 0 0 0:00

Mgmt-Ethernet-servic 2.5 0.0 8 0 100 500 0 0 0 0:00

Vc5-ResetMan-poll 0.5 0.0 5 0 100 500 0 0 0 0:00

Scp bus tx stats last 5 seconds last minute last hour

Events per second 7.62 7.47 0.00

Total : 1212

Scp bus rx stats last 5 seconds last minute last hour

Events per second 7.59 7.34 0.00

Total : 1195

Synergy bus tx stats last 5 seconds last minute last hour

Events per second 18.78 12.65 0.00

Total : 1906

Synergy bus rx stats last 5 seconds last minute last hour

Events per second 25.23 14.52 0.00

Total : 2046

Synergy bus tx drop stats last 5 seconds last minute last hour

Events per second 0.00 0.00 0.00

Total : 0

jzc4006-1> (enable)

Prashanth Krishnappa · ‎11-04-2004

The Sup2 architecture is based on three K1 ASICs

K1(a)---K1(b)---K1(c)

Each K1 ASIC has 6 gigabit connections coming out of it which go to line cards/uplink ports. As you can see from above diagram K1(a) and K1(c) are not directly connected. The WS-X4019 card connects K1(a) and K1(c) directly but at the expense of the Supervisor uplink ports. As you can see, the advantage of WS-X4019 module is for any traffic coming into/going out of K1(a) and going into/out of K1(c) need not traverse through K1(b).

You have a faulty fabric module which needs to be replaced. Open a TAC case and get it replaced.