02-16-2006 06:31 AM - edited 03-03-2019 01:52 AM
Hi, i've bought one 2950T Ehnanced image, on the cisco web i saw that this switch has SSH access configurable.
I tried to configure it, but i can't find the right command configuration, anyone can help me?
i tried this configuration:
line vty 0 4
transport input XXXX
where XXXX should be SSH, but it is not present.
02-16-2006 06:53 AM
hi
Can you post out the exact ios code name which is installed in your switch ??
As per the datasheet it does support SSHV2 if you have EI image installed in your switch ..
http://cisco.com/en/US/products/hw/switches/ps628/products_data_sheet09186a00801cfb64.html
regds
02-16-2006 07:48 AM
The IOS version is 12.1(22)EA6
this should works with SSH?
thanks in advance.
02-16-2006 08:37 AM
Can you please post the exact bin image you are using?
The IOS release you cited is available both with and without the crypto support. Crypto support is required to use ssh.
yes crypto and web mgmt: c2950-i6k2l2q4-tar.121-22.EA6.tar
yes crypto: c2950-i6k2l2q4-mz.121-22.EA6.bin
no crypto: c2950-i6q4l2-mz.121-22.EA6.bin
The "k" inidcator in the image name indicates crypto (3DES, ssh, ssl, snmpv3 - see http://www.cisco.com/en/US/products/sw/iosswrel/ps5460/products_qanda_item09186a00801af2c6.shtml ).
02-17-2006 02:01 AM
c2950-i6q4l2-mz.121-22.EA6.bin
I've this image...so i need to download the image with, crypto..thanks so much.
BR.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide