cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1121
Views
0
Helpful
2
Replies
Highlighted
Beginner

891F modem does not support hardware flowcontrol ?

I am testing modem on 891F, and dial-in/out works ok.

But when I try to get long output, such as "show tech-support" of 891F by dial-in, many characters are dropped and cannot get correct log.

Though the line 3 (for internal V92 modem)has "flowcontrol hardware", but the result in above inidicates that flowcontroll is not working.

 

I also noticed "show modem" does not include the internal modem.

 

The part of line 3 config is currently as below.

line 3
 modem InOut
 modem autoconfigure discovery
 no activation-character
 transport input all
 transport output all
 speed 115200
 flowcontrol hardware

 

Can I enable flowcontrol on the 891F ?

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Cisco TAC informed me that this issue is caused by manufacturing error, and do not have plan to fix it.

Therefore, TAC case has been closed without any solution.

View solution in original post

2 REPLIES 2
Highlighted
Beginner

Just a update on this issue.

I opened TAC case, and they replied it was caused by bug.

bug-id is CSCvi42892

I hope fixed version is released soon.

Highlighted

Cisco TAC informed me that this issue is caused by manufacturing error, and do not have plan to fix it.

Therefore, TAC case has been closed without any solution.

View solution in original post