ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3400
Views
0
Helpful
21
Replies
Highlighted
Beginner

enable http login to switch

hi,

Is it possible to enable login by http (web interface) to catalyst 4006 switch with WS-C4006 Software, Version NmpSW: 6.3(5) ??

Regards

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Engager

Re: enable http login to switch

Hi Ahmed,

yes you are right just copy the cv image and it will take care of the things and it will not affect the config as we are not changing the main system file and cv image is just for HTTP access and will not disturb the main config but always recommended to take the backup of your old config just for precaution.

HTH

Ankur

View solution in original post

21 REPLIES 21
Highlighted
Engager

Re: enable http login to switch

hello reagen

did you try the command set ip http server on the cat 4006 ??? you can also optionally set the http port by using the command set ip http port.... see the command reference for these below:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/rel6_3/cmd_ref/set_e_l.htm#1025758

try these and let us know

Raj

Highlighted
Engager

Re: enable http login to switch

Hi,

I think you also need to have Catalyst 4000 ciscoview ADP Flash Code in your switch to make it web enabled.

Like image name cat4000-cv.6-3-2a.bin which should have "cv" in it which stands for cisco view.

Sachin may also throw some light on it.

HTH

Ankur

Highlighted
Beginner

Re: enable http login to switch

I have tryed by this command set ip http server enable and I can login but after login I got one blank page contain only !!

Accessing Cisco Catalyst Switch

--------------------------------------------------------------------------------

Help resources

CCO at www.cisco.com - Cisco Connection Online, including the Technical Assistance Center (TAC).

tac@cisco.com - e-mail the TAC.

1-800-553-2447 or 408-526-7209 - phone the TAC.

cs-html@cisco.com - e-mail the HTML interface development group.

what I have to do ??

Highlighted
Engager

Re: enable http login to switch

Hi Ahmed,

Please check your image it must be having "cvk" keyword in it which stands for cisco view.

Just check your image.

HTH

Ankur

Highlighted
Beginner

Re: enable http login to switch

Hi ankur,

this is show flash

mecit (enable) show flash

-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name

1 .. ffffffff ed1d46d7 42d930 17 4118704 --- -- ---- --:--:-- cat4000.6-3-5.bin

11478736 bytes available (4118832 bytes used)

and this is show version

mecit (enable) sh ver

WS-C4006 Software, Version NmpSW: 6.3(5)

Copyright (c) 1995-2002 by Cisco Systems, Inc.

NMP S/W compiled on Feb 7 2002, 21:00:39

GSP S/W compiled on Feb 07 2002, 18:11:42

System Bootstrap Version: 5.4(1)

Hardware Version: 3.2 Model: WS-C4006 Serial #: FOX060900NL

Mod Port Model Serial # Versions

--- ---- ---------- -------------------- ---------------------------------

1 2 WS-X4013 JAE0612055W Hw : 3.2

Gsp: 6.3(5.0)

Nmp: 6.3(5)

2 34 WS-X4232-L3 JAB0633078B Hw : 1.7

3 48 WS-X4148-RJ JAE061302MT Hw : 3.0

4 48 WS-X4148-RJ JAE063408QR Hw : 3.1

5 48 WS-X4148-RJ JAE061301RD Hw : 3.0

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 65536K 33938K 31598K 16384K 5175K 11209K 480K 256K 224K

I think there is "CVK" keword in image .. so how I can downloaded so I will copy it to flash .. and is it will efect the current bin ?

Highlighted
Engager

Re: enable http login to switch

Hi Ahmed,

Just download the ADP flash code image from cisco site and copy it to the bootflash of the switch and you will be able to access the web page after that.

HTH

Ankur

Highlighted
Beginner

Re: enable http login to switch

Hi' ankur ..

this download available only for registered user at cisco .. my user is guest only !!

please can you help me to download this file because I don't have any CAT number to register at cisco.

my mail is ahmed@mecit.edu.om

if you can send it I will be thankful

Regards

Highlighted
Beginner

Re: enable http login to switch

Hi' ankur ..

this download available only for registered user at cisco .. my user is guest only !!

please can you help me to download this file because I don't have any CAT number to register at cisco.

my mail is ahmed@mecit.edu.om

if you can send it I will be thankful

Regards

Highlighted
Engager

Re: enable http login to switch

HI Ahmed,

Did it worked?

Ankur

Highlighted
Beginner

Re: enable http login to switch

hi ankur,

I'm still not able to upgrade it cuz I can't download 2 images files required for that

cat4000-cv.6-3-2a.bin

cat4000.6-3-2a.bin

PLS ankur I have one question ..

my show flash shown that

mecit (enable) show flash

-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name

1 .. ffffffff ed1d46d7 42d930 17 4118704 --- -- ---- --:--:-- cat4000.6-3-5.bin

11478736 bytes available (4118832 bytes used)

but dir bootflash shown no file is exist.. !!

how it's come and I want to know this images will affect my current configuration after upgrading or not... this is very important for me..

Highlighted
Engager

Re: enable http login to switch

Hi Ahmed,

I think you also have pcmcia card in your switch.

Can you post me the outpu of "dir slot0:" and "dir bootflash:"

Lowering down the image may affect your current config better to upgrade the image. There is also cv image in 7 release. But you can leave the current image which is 6.5 in your swich just copy the cv image which is 6.3.2a cv image.

HTH

Ankur

Highlighted
Beginner

Re: enable http login to switch

Dear Ankur,

I will send for you these output tomorrow or saterday one I back from my weekend.

regarding images verision this is note from cisco documents "Enabling the Catalyst Web Interface on Catalyst 4000 Series Switches Running CatOS"

Note: The CV images are not released for every system image released. Use the CV image in the same release train as the system image. For example, as of this writing, 6.3(2a) is the latest CV image in the 6.3 software release train, and should be used if your system image is 6.3.x.

then I think I have to use CV image with same system image version meaning cat4000-cv.6-3-2a.bin with cat4000.6-3-2a.bin..

anyway I will send the output for u and let see what we I have to do.

Thanks

Highlighted
Beginner

Re: enable http login to switch

Dear Ankur,

The following is output u have requested but as I tolled u it's shown no such file

please advice.

mecit (enable) dir slot0

No such file

11478736 bytes available (4118832 bytes used).

mecit (enable) dir bootflash

No such file

11478736 bytes available (4118832 bytes used)

mecit (enable) dir flash

No such file

11478736 bytes available (4118832 bytes used)

mecit (enable) show flash

-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name

1 .. ffffffff ed1d46d7 42d930 17 4118704 --- -- ---- --:--:-- cat4000.6-3-

5.bin

11478736 bytes available (4118832 bytes used)

Highlighted
Engager

Re: enable http login to switch

Hi Ahmed,

You are right but your system image is 6.3(5) that means 6.3 is the train you are following so even if you copy 6.3(2a) it will definetely work.

For any 6.3(x) system image cv image 6.3(2a) will work.

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a0080094156.shtml#web_int

For why this image is not show in dir bootflash: can you try this command

mecit (enable) undelete bootflash:cat4000.6-3-5.bin

then try again

dir bootflash:

HTH

Ankur