09-25-2006 07:46 PM - edited 03-03-2019 05:14 AM
We share meeting rooms with another company, we require the Acess VLAN to be disabled when the room is not being used by a member from our firm, how do I go about doing this?
We still need the Voice VLAN to be active.
Any solutions would be great
We are using 3560's
Solved! Go to Solution.
09-26-2006 02:32 AM
Hi there,
There are a few ways you could do this. The first and most painfull way would be to take the mac-address of the pc's that will use the switch port and only allow them to connect using port-security. You could also use dot1x authentication on the port. Or you could change the access vlan to one that nothing is on when the room is not in use. That way, the phone will still work, but the data will be in a vlan that goes nowhere.
Hope that helps,
LH
Please rate all posts
09-25-2006 11:15 PM
what I got is that you have PC and phone connected to a port, and you want PC configured for access VLAN should not work while phone in voice VLAN should work. Please let me know if it is correct.
Also can you paste the config you have on the switchport ?
09-26-2006 02:32 AM
Hi there,
There are a few ways you could do this. The first and most painfull way would be to take the mac-address of the pc's that will use the switch port and only allow them to connect using port-security. You could also use dot1x authentication on the port. Or you could change the access vlan to one that nothing is on when the room is not in use. That way, the phone will still work, but the data will be in a vlan that goes nowhere.
Hope that helps,
LH
Please rate all posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide