My client is adding a new catalyst 2950T-48 port switch into his cluster management interface, but for some weird reason, C2950T-48 is not recognoized by the CMI and listed as an unknown device in the GUI. IOS version is
flash:/c2950-i6q4l2-mz.121-19.EA1c.bin
Here is the part of output of show version:
#sh version
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(19)EA1c, RELEASE SOFTWAR
(fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 02-Feb-04 23:29 by yenanh
Image text-base: 0x80010000, data-base: 0x8058A000
ROM: Bootstrap program is C2950 boot loader
** uptime is 5 days, 21 hours, 21 minutes
System returned to ROM by power-on
System image file is "flash:/c2950-i6q4l2-mz.121-19.EA1c.bin"
cisco WS-C2950T-48-SI (RC32300) processor (revision D0) with 20808K bytes of me
ory.
Processor board ID FHK0814Z0N1
Last reset from system-reset
Running Standard Image
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0F:90:82:3A:40
Motherboard assembly number: 73-9102-03
Power supply part number: 34-0965-01
Motherboard serial number: FOC0*******
Power supply serial number: DAB08******
Model revision number: D0
Motherboard revision number: A0
Model number: WS-C2950T-48-SI
System serial number: FHK08******
CLEI Code Number: CNMRU002RA
Top Assembly Part Number: 800-24111-01
Top Assembly Revision Number: D0
Version ID: N/A
Configuration register is 0xF
Anybody has any idea?
Thanks very much!
