Other Security Subjects

What files and entries need to be configured for a sensor to forward shunning requests to another sensor? Thanks in advanced.

After upgrading PIX to 6.1.1, I noticed:Jan 10 09:30:25 10.10.0.1 Jan 10 2002 09:30:01: %PIX-3-106014: Deny inbound icmp src outside:xx.xx.xx.xx dst perimeter1:xx.xx.xx.xx(type 3, code 4)Is this rfc1191 traffic coming back?Am I going to have to open ...

How Cisco IDS is better then ISS ?

Is it possible to join a workgroup on a different DMZ (from higher to lower security)? If can, how? Thanks in advance!

Can any one point out a document stating the difference between Users and Sessions. The 3005 VPN concentrator says it can support 100 users or 100 session. The only problem is, what if 51 remote users have 2 windows open to different servers at HQ wo...

I need to find out what port to open to allow pptp to the vpn server on a cisco router 2620. Please let me know.

how do i copy from flash to tftp in PIX 515Ri want to backup my config in flash to tftp..

This is a new custom signature entry for the recent SysV /bin/login Buffer Overflow referenced in CERT Advisory CA-2001-34. This signature is provided as a supplement to S13 signatures 3403 and 3501 to better detect any attacks. It will be incorpora...

I am trying to configure a cisco 1751 router with a 1 ethernet WIC card. I need to have remote computers able to connect to the router via cable modem or DSL. Do I have the correct hardware needed to do this? And if not what do I need?Thank you

is it neccsary for configure loopback and null interface on the router? and why it is required to do so.

I am trying to upgrade the Activation keys on PIX 515 V6.1To do this I am trying to upgrade the image via the tftp from monitor.I have set addr/file/gate/server etcWhen I try the tftp the tftp server sees the attempts but fails to send any bytes; ret...

Is there a problem with signature 4601 ? I have seen it trigger from several thousand addresses within 2 days of adding it to a sensors.

Hi,I am looking for information on securing Cisco SWITCHES based on their location on the network. When I say location, I mean, what needs to be done if the SWITCH is located in the DMZ what needs to be done to secure it, if it is on the inside corp...

Hi allI'm finding difficulties in getting the right time/date on my CSPM IDS Event viewer. The Date/time settings on CSPM host is perfect.[GMT+4.00]But the sensor Bios timings / sysconfig-sensortiming settings always has conflicts. For example,, I hv...

We have configured a PIX (version 6.1)to take VPN tunnel connections from cisco secure vpn client v3.0The vpn client dials into local ISP and then connects to PIX to establish a vpn tunnel. The local PC then gets an IP address from the pool configur...