11-21-2001 12:27 AM - edited 03-08-2019 09:13 PM
Help, plz.
I have a 1720 running dynamic nat and it works ok.
Now i have a pc with 192.168.1.100 and I want to map it to 210.17.25.122, so that I can access the pc outside. What should I do?
My running config is as following.
ip dhcp pool 0
network 192.168.1.0 255.255.255.0
default-router 10.10.10.100
dns-server 168.95.1.1 168.95.192.1
!
no ip dhcp-client network-discovery
!
!
!
interface FastEthernet0
description testip
ip address 192.168.1.254 255.255.255.0
ip nat inside
no keepalive
speed auto
!
interface Serial0
ip address 210.17.25.126 255.255.255.248
ip nat outside
!
ip nat pool 1stnat 210.17.25.121 210.17.25.121 netmask 255.255.255.248
ip nat inside source list 1 pool 1stnat overload
ip classless
ip route 0.0.0.0 0.0.0.0 210.17.25.126
no ip http server
!
access-list 1 permit 192.168.1.0 0.0.0.255
11-21-2001 11:29 AM
I would like to know this also...
I think it is common if you host your email server, you have a situation where you want Static NAT for the email server and PAT for Browsing.
Can someone please reply?
Thanks
- Carla Saldanha -
11-21-2001 11:44 AM
see:
http://www.cisco.com/univercd/home/home.htm
the command is:
ip nat inside source static 192.168.1.100 210.17.25.122
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide