IOS EzVPN -> Concentrator 3005

[mklimesch]

Hello,

have anybody configured a client-to-site vpn with a cisco 1760 with an adsl interface (dynamic ip) and a cisco concentrator 3005 ? I have configured this like explain here . . .

http://www.cisco.com/warp/public/471/vpn_ios_ezvpn.html

But at my cisco concentrator, no packet arrives when i say "crypto ipsec client ezvpn connect".

Any idea ???

Thanks in advance . . .

[awaheed]

Hi,

Kindly make sure that after you turn on the following debug: debug crypto ipsec client ezvpn

that you see some packets at the Console. Then make sure that IKE (udp port 500) or IPSec (IP Protocol 50) is not being blocked in the middle.

Hope this helps,

Regards,

Aamir

-=-=-