12-03-2001 02:20 AM - edited 03-08-2019 09:19 PM
I have a misconfigured Pix 515, and need to clear the flash in it.
The pix-login authentication is set to TACACS+ for
both telnet and console access. But since the Ip address on the interfaces are wrong due to misconfiguration, i cant fix a connection to
the TACACS+ server.
I´ve tried the "no-password" files, but since they
do not clear the TACACS+ configuration, they wont help.
I´ve opened the chassis but dont know what jumpers to change to clear the flash.
Please help me out!
Regards
Hakan
12-03-2001 06:52 AM
Call TAC and open a case! They're real good at the whole support thing, especially on Cisco stuff ;-)
12-06-2001 07:30 AM
You may find the following link useful:
http://www.cisco.com/warp/public/110/34.shtml
This URL provides details of Password Recovery for PIX.
Best Regards,
Charles A R Coutts
Course Representative
Computer Network Management & Design
The Robert Gordon University, Aberdeen
12-06-2001 09:04 AM
I´ve resolved this issue,
Its undocumented...
I downloaded a file called erasedisk611.bin from
ciscos ftp-site (it was not available from the web).
And installed it in monitor mode...
//Håkan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide