07-30-2004 12:38 PM - edited 03-09-2019 08:15 AM
Im using the 4.0.1 build. My workstations have sucessfully downloaded the agent but are unable to communicate with the Mngmt server. I did a packet capture and I receive a checksum error. The Mngmt Server has the correct license...Any ideas?
07-30-2004 01:18 PM
hi,
check the log file named csalog.txt on the agent, it should give more information about the issue.
Thanks
Nadeem
08-02-2004 06:41 AM
The log unfortuntaley only points out the painfully obvious with no other clues. Here is the output from the log
[2004-08-02 03:52:19.838] [PID=532] [Csamanager]: Registering with server enosc-1f98ewvri, Failure (2035)
[2004-08-02 03:52:19.838] [PID=532] [Csamanager]: Will retry to register in 10 sec
[2004-08-02 03:52:19.898] [PID=532] [Csamanager]: Archived previous log messages into logfile 'C:\Program Files\Cisco\CSAgent\log\csalog.015.txt'
[2004-08-02 03:52:30.043] [PID=532] [Csamanager]: Registration failed without message Error code=2035
[2004-08-02 03:52:30.043] [PID=532] [Csamanager]: Registering with server enosc-1f98ewvri, Failure (2035)
This log message obvisouly shows up countless times. Any other suggestions or ideas?
08-02-2004 09:52 AM
The error code 2035 translates to
OKENA_STATUS_INVALID_LICENSE = 2035,
You need license for your agents.
Thanks
Nadeem
08-02-2004 10:22 AM
Huh?? Under Licenses in the Mngmt Center I show a valid license for 3 agents, but maybe they gave me a wrong license I will check with my vendor. Thanks for you timely responses and help
08-02-2004 07:01 AM
Sorry about my last post. I didnt check the csalog for CSAMC. The error I receive there is
Feature: desktopagent
License path: D:\PROGRA~1\CSCOpx\CSAMC\cfg\CSA4.0-NFR.lic
FLEXlm error: -5,357
For further information, refer to the FLEXlm End User Manual,
available at "www.globetrotter.com".
[2004-08-02 06:58:30.953] [PID=3948] [webagent]: Agent Req 'Registration' Failure(2035), ip=192.168.2.151, huid={6DF14834-AA29-4FFF-B65D-ACA74049C1CD}
[2004-08-02 06:58:34.750] [PID=3948] [webagent]: No such feature exists
No such feature exists?? I looked on google and Flexlm -5 error code means exactly that:
http://www.abaqus.com/support/flexlm/chap14.htm
Any more ideas, suggestions or any recommendations on who I should contact would be greatly appreciated?
Thanks
Victor
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide