12-20-2005 07:48 PM - edited 03-09-2019 01:25 PM
I need to host email, www inside of my firewall. I am using a cisco 1710 router with fw/ids/ipsec IOS. How would I forward specific ports from the Internet to specific host on my internal network?
With a pix I would need more than one IP public address. I am hoping this is not true with the router.
thanks
12-21-2005 02:10 PM
for ios router,
ip nat inside source route-map nonat interface Dialer1 overload
ip nat inside source static tcp
ip nat inside source static tcp
access-list inbound permit tcp any host
access-list inbound permit tcp any host
further, pix is also capable to achieve the same objective.
12-22-2005 05:45 AM
So by creating the dialer interface with route-map I can use the single ip address assigned to me for both Internet access and forwarding needed ports to specific internal hosts. This looks like it will work. I will test it today
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide