11-14-2005 08:32 AM - edited 03-09-2019 01:02 PM
Dear All,
I have Pix 506 with 6.3 Version. Public IP is assigned on Outside Interface. Need to Nat internal server to public IP assigned on Outside interface, So far no luck through PDM. ANY Advise ??
Regards
11-14-2005 07:01 PM
not very familiar with the pdm. below is the sample codes if you would like to try cli.
e.g.
static (inside,outside) tcp interface 80
access-list inbound permit tcp any interface outside eq 80
access-group inbound in interface outside
with the above same, inbound http access is permitted to the web server.
11-15-2005 12:03 AM
The above example is port forwarding. I suspect this is what manish-young is looking for.You can also use a NAT configuration.
static (inside,outside) outside inside
or
static (inside,outside)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide