10-12-2006 10:54 PM - edited 03-09-2019 04:30 PM
Hello
I have a problem to make a telnet on my PIX525 with 7.2 version. The windows is opened but the prompt don't appair in it.
Thanks
10-12-2006 11:04 PM
Few questions;
What terminal client are you using?
Can you connect to other devices with this same client?
Are you on the same segment as the firewall when you telnet?
Paul
10-12-2006 11:25 PM
I used Teraterm or DOS windows for the telnet connections. We have others Firewall CISCO and that's work correctly.
The client is on the same segment.
10-13-2006 01:17 PM
Is the pix 525 configured to allow telnet connection for the IP Address that you are sourcing your telnet packets from.
Eventhough, are you connecting from the same network that pix is connected to, the pix has to be configured to allow telnet connections.
Regards,
Arul
10-16-2006 04:48 AM
Hello
i'm connected on the same interface
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide