When I connect to my PIX 501 (6.3(4)) from outside I authenticate and can ping the internal machines OK. But I can't map any shares on those machines.
When I try to map a drive, I see the following in the PIX log:
No translation group found for tcp src outside:192.168.200.2/1075 dst inside:192.168.0.250/139
I'm surprised to see the 192.168.200.2 address. That is the private internal address of the outside machine on it's remote LAN. I would thought I would see the ip address assigned to it from the PIX VPN pool which I have verified to be 192.168.4.1.
My current config:
...
access-list inside_outbound_nat0_acl permit ip 192.168.0.0 255.255.255.0 192.168.4.0 255.255.255.0
...
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
...
ip local pool vpn_users 192.168.4.1-192.168.4.254
...
sysopt connection permit-pptp
...
vpdn group PPTP-VPDN-GROUP accept dialin pptp
vpdn group PPTP-VPDN-GROUP ppp authentication pap
vpdn group PPTP-VPDN-GROUP ppp authentication chap
vpdn group PPTP-VPDN-GROUP ppp authentication mschap
vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto
vpdn group PPTP-VPDN-GROUP client configuration address local vpn_users
vpdn group PPTP-VPDN-GROUP pptp echo 60
vpdn group PPTP-VPDN-GROUP client authentication local
vpdn enable outside
...
Thanks for any help!
-Doug