Other Security Subjects

Hi all,i've found a strange problem with equinux vpn software and new 1841 adsl router.When i use the old 837 adsl router the software works fine and vpn goes up and running. If i change the 837 with 1841 ( with on board 2 wic-adsl + ppp multilink ) ...

When I connect to my PIX 501 (6.3(4)) from outside I authenticate and can ping the internal machines OK. But I can't map any shares on those machines.When I try to map a drive, I see the following in the PIX log:No translation group found for tcp sr...

I got a lot of error message from my syslog server , I check FWSM system message got explanation "catch-all error" anyone can tell me what's catch-all error ? What reson production ???Feb 10 10:37:51 172.19.239.243 %FWSM-6-302014: Teardown TCP connec...

Hi,We recently migrated Server VLAN behind FWSM running in transparent mode.Before migration, access to mail server was working fine. All users accessing the email server are required to login.However, after this VLAN migrated behind FWSM, users are ...

HiWe've got a BBSM 5.3 SP2, to which we can't get RDP/TS access for management - is this normal?From the box itself we've noted that you can RDP to itself on it's external interface, but not to the Internal interface.We've tried changing the binding ...

Hi,We have a scenario where a pair of PIXes exist, connecting two seperate entities, with outside interfaces on the same subnet.We replaced one of the PIX firewalls with an ASA and had everything configured correctly, but communications between two e...

Welcome to the Cisco Networking Professionals Ask the Expert conversation. This is an opportunity to discuss with Cisco expert Charlie Stokes about Intrusion Prevention Systems. Charlie works as an Intrusion Prevention Systems (IPS) technical marketi...

Hi,I have been tasked with redesigning our DMZ environment. Presently we have Pix 515e's in f/o bundle, which has inside, outside, and dmz interfaces.Due to security requirements we now have a need to create a multi-layer firewall architecture (2 ASA...

ASDM has been working fine, but has now decided to stop working. When I try to start it, it now goes into a loop showing 'Parsing Running Configuration', followed by 'Verifying Running Configuration', then back to the beginning again.Any ideas?ASDM 5...

Hello,I have an event which system functions are executed from a buffer. I would like to figure out if there is a way to match just that pattern for that function that the software calls or not.Atypical System Behavior Checks Access system function...

Any suggestion for a good place to get CISSP ILT based training?

Hi AllI have a PIX 515E installed in my network having 150 PC. And I want to block MSN and yahoo for all users except for some particular user.Can u tell me how ca i block this thru PIX.Thanks.

Hi! I have a problem on permitting H323 traffic through a PIX 520 IOS ver 6.3 (3).These are rules setted to allow traffic:fixup protocol h323 h225 1720fixup protocol h323 ras 1718-1719 They don't seem to be working (I tried also to add ACLs without ...

I have just migrated to PIX V7.11 and ASDM V5.11 (from PIX V6.3, PDM V3):Interesting function is the capability to get the real-time syslogs messages, and the very nice function (just available in ASDM 5.11, not in 5.04) that allows to select 1 syslo...