06-24-2002 05:25 AM - edited 02-20-2020 09:17 PM
Dear All;
At my radius I have problem with stop record , when I check the debug menu I find that the lns send the username twice which is wrong it must send it once , I don't know where is the problem could it be at aaa configuration the following are aaa configuration at my LNS router :
aaa authentication login vpdn group radius
aaa authentication ppp vpdn group radius
aaa authorization network default group radius
aaa accounting suppress null-username
aaa accounting update newinfo
aaa accounting exec default start-stop group radius
aaa accounting network default wait-start group radius
aaa accounting system default start-stop group radius
aaa session-id common
could you please find where the problem is
regards
Alaa Musa
06-24-2002 08:30 PM
LNS should not send the username twice in one accounting packet to radius..config looks ok to me but just turn on "debug radius" and post it here so that we can decode the accounting packet to radius from LNS and see whats going on...Tejal
06-25-2002 09:54 PM
Dear Sir :
Thanks for you response the following are the debug for radius at LNS router
Jun 26 08:36:15: RADIUS: Acct-Session-Id [44] 10 "00003F9C"
Jun 26 08:36:15: RADIUS: Tunnel-Server-Endpoi[67] 15 00:"212.118.2.22"
Jun 26 08:36:15: RADIUS: Tunnel-Client-Endpoi[66] 14 00:"212.34.0.50"
Jun 26 08:36:15: RADIUS: Tunnel-Assignment-Id[82] 4 00:"1"
Jun 26 08:36:15: RADIUS: Tunnel-Type [64] 6 00:L2TP [3]
Jun 26 08:36:15: RADIUS: Acct-Tunnel-Connecti[68] 8 "181229"
Jun 26 08:36:15: RADIUS: Tunnel-Client-Auth-I[90] 11 00:"BASo-TLA"
Jun 26 08:36:15: RADIUS: Tunnel-Server-Auth-I[91] 11 00:"LNS_ADSL"
Jun 26 08:36:15: RADIUS: Framed-Protocol [7] 6 PPP [1]
Jun 26 08:36:15: RADIUS: Framed-IP-Address [8] 6 212.118.6.233
Jun 26 08:36:15: RADIUS: User-Name [1] 19 "momaiyaz@adslnets"
Jun 26 08:36:15: RADIUS: Acct-Session-Time [46] 6 104
Jun 26 08:36:15: RADIUS: Acct-Input-Octets [42] 6 108757
Jun 26 08:36:15: RADIUS: Acct-Output-Octets [43] 6 1072685
Jun 26 08:36:15: RADIUS: Acct-Input-Packets [47] 6 920
Jun 26 08:36:15: RADIUS: Acct-Output-Packets [48] 6 1070
Jun 26 08:36:15: RADIUS: Acct-Terminate-Cause[49] 6 user-request [1]
Jun 26 08:36:15: RADIUS: Authentic [45] 6 RADIUS [1]
Jun 26 08:36:15: RADIUS: User-Name [1] 19 "momaiyaz@adslnets"
Jun 26 08:36:15: RADIUS: Acct-Status-Type [40] 6 Stop [2]
Jun 26 08:36:15: RADIUS: NAS-Port [5] 6 25
Jun 26 08:36:15: RADIUS: NAS-Port-Type [61] 6 Virtual [5]
Jun 26 08:36:15: RADIUS: Service-Type [6] 6 Framed [2]
Jun 26 08:36:15: RADIUS: NAS-IP-Address [4] 6 212.118.2.121
Jun 26 08:36:15: RADIUS: Event-Timestamp [55] 6 1025080575
Jun 26 08:36:15: RADIUS: Acct-Delay-Time [41] 6 0
And The IOS At LNS router are : c3660-js-mz.122-8.T4.bin
Regards
Alaa Musa
06-26-2002 09:50 PM
I agree with you..Router is sending the username twice in "accounting-stop" record..Here is the bug for that issue CSCdw79914..Its resolved in 12.2(9.2)T onwards so wait for 12.2(10)T to be released..or contact a www.cisco.com/tac for more..Thanks..Tejal
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide